A Utilizing Plant Waste Materials As Pads In Evaporative Cooling System Powered By Solar Energy For Environmental Control In Greenhouses

Faculty Agriculture Year: 2024
Type of Publication: ZU Hosted Pages:
Authors:
Journal: CUESTIONES DE FISIOTERAPIA Andalusian Society of Physiotherapy "SOFÍA" Volume:
Keywords : , Utilizing Plant Waste Materials , Pads , Evaporative    
Abstract:
The study was conducted to achieve optimal pad performance, which can provide an ideal environment for plant growth and production. This study was conducted near Al-Salihiya city in Sharqia Governorate. The study evaluated the performance of three types of evaporative cooling pads (cellulose, rice straw, and palm fiber), with 50% and no shading, and with fans on for two minutes and off for (3 minutes, 5 minutes, and 8 minutes). The performance evaluation included environmental parameters (temperature, relative humidity, water consumption, vapor pressure drop, cooling efficiency, and electrical cooling efficiency) hourly, from 9 am to 5 pm, daily. The data showed that the best results were achieved with cellulose pads, followed by rice straw, and the lowest results were achieved with palm fiber pads. The rice straw pad demonstrated effective results as an alternative to commercial cellulose in terms of efficiency, operation, and environmental conditions. The pad achieved a cooling efficiency of 61-71.5% in shaded conditions, and 57-62.5% without shade. It also achieved good electrical cooling efficiency, ranging from 1.1-1.75 °C/kWh in shaded conditions. The pad also achieved cooling at 10.4 °C, 62% humidity, and a cooling efficiency of 71.5%, with a water consumption of 3.5 liters/m²/day. On the other hand, the system's operating periods yielded mixed results, but the best results were achieved with 3 minute idle periods without shade and 5 minutes with shade. Shading also achieved good results in reducing the heat load and increasing the efficiency of the alternative pads
   
     
 
       

Author Related Publications

  • Alaa Awny Ahmed Abdelaty, "Effect Of Fermentation Mixture And Particle Size On Biogas Production From Organic And Agricultural Wastes", Misr Society of Agricultural Engineering (MSAE), Egypt, 2018 More
  • Alaa Awny Ahmed Abdelaty, "Finite element modeling of the breakage behavior of agricultural biomass pellets under different heights during handling and storage", ELSEVIER, 2021 More
  • Alaa Awny Ahmed Abdelaty, "STUDY ON THE MECHANIZATION OF BEAN (Phaseolus vulgaris) CROP UNDER EGYPTIAN CONDITIONS", مجلة البحوث الزراعية بكلية الزراعة جامعة الزقازيق, 2012 More
  • Alaa Awny Ahmed Abdelaty, "PERFORMANCE EVALUATION OF A LOCAL MACHINE FOR CUTTING AND CHOPPING COTTON STALKS", مجلة البحوث الزراعية بكلية الزراعة جامعة الزقازيق, 2016 More
  • Alaa Awny Ahmed Abdelaty, "Evaluation of biogas as sustainable heating alternative for poultry houses: Effects on production performance and energy efficiency", elsevier, 2025 More

Department Related Publications

  • Mohammed Mohamed Elhefny Badr, "AERODYNAMIC ANALYSIS AND PERFORMANCE EVALUATION OF RICE MILLING MACHINE", الجمعيةالمصرية للهندسة الزراعية-مصر, 2013 More
  • Mohammed Mohamed Elhefny Badr, "DEVELOPMENT OF RICE MILLING MACHINE FOR DIFFERENT RICE VARIETIES TO IMPROVE PRODUCT QUALITY", الجمعيةالمصرية للهندسة الزراعية-مصر, 2013 More
  • Mohammed Mohamed Elhefny Badr, "CONSTRUCTION AND PERFORMANCE EVALUATION OF A CENTRIFUGAL MILK SEPARATOR", الجمعيةالمصرية للهندسة الزراعية-مصر, 2013 More
  • Mohammed Mohamed Elhefny Badr, "A NEW MACHINE FOR PRODUCING BUTTER TO SUIT SMALL PROJECTS", الجمعية المصرية للهندسة الزراعية-مصر, 2014 More
  • Mohammed Mohamed Elhefny Badr, "DESIGN CONSIDERATIONS OF A COMBINATION MACHINE FOR CHOPPING AND MILLING ARUNDO DONAX (PART I)", الجمعية المصرية للهندسة الزراعية-مصر, 2014 More
Tweet