Nanoparticle-Enabled Zn-0.1Mg Alloy with Long-Term Stability, Refined Degradation, and Favorable Biocompatibility for Biodegradable Implant Devices

Faculty Engineering Year: 2024
Type of Publication: ZU Hosted Pages:
Authors:
Journal: ACS Applied Materials & Interfaces American Chemical Society Volume:
Keywords : Nanoparticle-Enabled Zn-0.1Mg Alloy with Long-Term Stability,    
Abstract:
Zinc-based alloys, specifically Zn–Mg, have garnered considerable attention as promising materials for biodegradable implants due to their favorable mechanical strength, appropriate corrosion rate, and biocompatibility. Nevertheless, the alloy’s lack of mechanical stability and integrity, resulting from ductility loss induced by age hardening at room temperature, hampers its practical bioapplication. In this study, ceramic nanoparticles have been successfully incorporated into the Zn–Mg alloy system, leading to a significant improvement in long-term stability as well as mechanical strength and ductility. In addition, this study represents the first investigation of Zn-based nanocomposites both in vitro and in vivo to comprehend the influence of nanoparticles on the degradation behavior and biocompatibility of the Zn system. The findings indicate that the incorporation of WC nanoparticles effectively refines and stabilizes the degradation behavior of Zn–Mg without negatively impacting the cytocompatibility of the alloy. The subcutaneous implantation and femoral implantation further prove the benefits of nanoparticle incorporation and found no negative effects. Collectively, Zn–Mg–WC nanocomposites yield great potential for implant usage
   
     
 
       

Author Related Publications

  • Walaa AbdelAzim Abdulaziz AbdelAal, "Microstructure evolution and mechanical properties of Al/Al–12%Si (multilayer processed by accumulative roll bonding (ARB", ScienceDirect, 2015 More
  • Walaa AbdelAzim Abdulaziz AbdelAal, "Effect of surface roughness due to wire brushing on cold roll bonding of Al 1050 sheets", كلية الهندسة, 2015 More
  • Walaa AbdelAzim Abdulaziz AbdelAal, "Grain size affecting the deformation characteristics via micro-injection upsetting", springer, 2021 More
  • Walaa AbdelAzim Abdulaziz AbdelAal, "Synthesis and Characterization of Hybrid Fiber-Reinforced Polymer by Adding Ceramic Nanoparticles for Aeronautical Structural Applications", MDPI, 2021 More
  • Walaa AbdelAzim Abdulaziz AbdelAal, "Metallurgical analysis of ASME SA213 T12 boiler vertical water-wall tubes failure", elsevier, 2023 More

Department Related Publications

  • Mohamed Ibrahim Mohamed Abdelaal, "3D FEM simulations and experimental validation of plastic deformation of pure aluminum deformed by ECAP and combination of ECAP and direct extrusion", sciencedirect, 2017 More
  • Mohamed Ali Elsayed Mohamed Agwa , "Optimum processing parameters for equal channel angular pressing", Elsevier, 2016 More
  • Amal Elhosaieny Meselhy Alshorbagy, "Optimum processing parameters for equal channel angular pressing", Elsevier, 2016 More
  • Mariam Nabil Aly Hssan, "Optimum processing parameters for equal channel angular pressing", Elsevier, 2016 More
  • Mohamed Adel Taha Mohamed Abass , "ANN Surface Roughness Optimization of AZ61 Magnesium Alloy Finish Turning: Minimum Machining Times at Prime Machining Costs", mdpi, 2018 More
Tweet