Improving the reactor safety aspects by the implementation of (Th-U233-Pu) fuel in a PWR assembly

Faculty Science Year: 2024
Type of Publication: ZU Hosted Pages:
Authors:
Journal: Nuclear engineering and design Elsevier Ltd Volume:
Keywords : Improving , reactor safety aspects , , implementation , (Th-U233-Pu)    
Abstract:
The aim of this work is not only to demonstrate how to introduce thorium as an alternative nuclear fuel into pressurized water reactors, but also to examine the several advantages that (Th, U233, Pu) has over (Th, U233) and (Th, Pu) fuels when (U233O2) is mixed with (Th-Pu)O2 fuel. To investigate these advantages, three thorium fuels, (Th, U233), (Th-U233-Pu) and (Th-Pu) are simulated and analyzed by the MCNPX 2.7 code. The reactor safety aspects of these fuels are compared with those of the reference UO2 fuel. The concentration of Th-233 and fissile isotopes is adjusted to obtain criticality (Keff = 1.03) at the same burnup value (35 GWd/tonne) for all fuel types. Based on the predicted results, the author revealed that: 1) 56 % of plutonium (238-242) is depleted in the case of (Th-U233-Pu), while 41 % of plutonium is depleted in the (Th-Pu) at 60 GWd/tonne. This result indicates that (Th-U233-Pu) is more proliferation-resistant than (Th-Pu). 2) In terms of improving the quantity of radioactive waste, (Th, U233, Pu) model produces 0.6 and 0.9 times the amount of Am (241-243) and Cm (242-244) in UO2, respectively. On the other hand, (Th, Pu) fuel produces about 7 times the amount of Am and 8 times the amount of Cm in UO2 fuel. 3) The fuel temperature coefficient (FTC) and moderator temperature coefficient (MTC) of (Th-U233-Pu) are more negative than that of UO2 and (Th-U233) at the early stages of fuel burnup (0–5) GWd/tonne.4) the total mass of fissile isotopes in (Th-U233-Pu) is greater than that of UO2 and (Th-U233) and as a result, the fuel life time is longer in the case of (Th-U233-Pu). 4) The conversion ratio provided by (Th-U233-Pu) is greater than that provided by UO2 and (Th-U233).This behavior is expected owing to the hardening of neutron spectrum in (Th-U233-Pu). 5) The peaking factors are lower in the case of (Th-U233-Pu) compared to (Th-Pu). 6) The concentration of xenon and samarium is noticeably lower for (Th-U233-Pu) in comparison with (Th-Pu) and consequently, the time required for restarting the reactor is accelerated.
   
     
 
       

Author Related Publications

  • Elsayed Saied Abdelfattah Moustafa, "Full core analysis of IRIS reactor by using MCNPX", Applied Radiationand Isotopes, 2016 More
  • Elsayed Saied Abdelfattah Moustafa, "Comparison of MCNPX/WIMS-D5 BurnupCalculation with SAS2H/KENO-v for the IRIS Reactor", Arab Journal of Nuclear Science and Applications, 2016 More
  • Elsayed Saied Abdelfattah Moustafa, "Fuel burnup analysis for IRIS reactor using MCNPX and WIMS-D5 codes", PERGAMON-ELSEVIER SCIENCE LTD, 2016 More
  • Elsayed Saied Abdelfattah Moustafa, "feasibility Study of thorium-plutonium Mixed oxide Assembly in Light Water Reactors", nature research, 2019 More
  • Elsayed Saied Abdelfattah Moustafa, "ANALYSIS OF NEUTRONIC PARAMETERS OF A STANDARD PWR ASSEMBLY BY MCNPX CODE", Egyptian society of applied science, 2018 More

Department Related Publications

  • Abdullah Fathi Aly Saad, "Ageing effects on polymeric track detectors: studies of etched tracks at nanosize scale using atomic force microscope", RADIATION PHYSICS, 2012 More
  • Ahmed Elfalaky Elsaid Abdelrehim, "Electrical and Dielectric Properties of Charge Transfer Complexes: Interactions between Norfloxacin and Ciprofloxacin with Picric Acid and 3,5-Dinitrobenzoic Acid1", Russa, 2013 More
  • Ahmed Elfalaky Elsaid Abdelrehim, "Spectroscopic and physical measurements on charge-transfer complexes: Interactions between norfloxacin and ciprofloxacin drugs with picric acid and 3,5-dinitrobenzoic acid acceptors", Englabd, 2011 More
  • Ahmed Elfalaky Elsaid Abdelrehim, "Bone-like Material, Synthesis, Optimization and Characterization", America, 2014 More
  • Ahmed Elfalaky Elsaid Abdelrehim, "Structural and electrical properties of HgTe thin films", england, 2000 More
Tweet