Deep lean is a novel approach that is concerned with the profound analysis for waste’s behavior at hidden layers in manufacturing processes to enhance processes’ reliability level at the upstream. Ideal Standard Co. for bathtubs suered from defects and cost losses in the spraying section, due to dierences in the painting cover thickness due to bubbles, caused by eddies, which move toward the bathtubs through hoses. These bubbles and their movement are considered as a form of lean’s waste. The spraying liquid inside the tanks and hoses must move with uniform velocity, viscosity, pressure, feed rate and suitable Reynolds circulation values to eliminate the eddy causes. These factors are tackled through the adoption Internet of Things (IoT) technologies that are aided by neural networks (NN) when an abnormal flow rate is detected using sensor data in real-time that can reduce the defects. The NN aimed at forecasting eddies’ movement lines that carry bubbles and works on being blasted before entering the hoses through using Design of Experiment (DOE). This paper illustrates a deep lean perspective as driven by the define, measure, analysis, improvement and control (DMAIC) methodology to improve reliability. The eddy moves downstream slowly with an anti-clockwise flow for some of the optimal values for the influencing factors, whereas the circulation of W increases, whether for vertical or horizontal travel.