Zagazig University Digital Repository
Home
Thesis & Publications
All Contents
Publications
Thesis
Graduation Projects
Research Area
Research Area Reports
Search by Research Area
Universities Thesis
ACADEMIC Links
ACADEMIC RESEARCH
Zagazig University Authors
Africa Research Statistics
Google Scholar
Research Gate
Researcher ID
CrossRef
Modes I/II SIF of a diametrically compressed Brazilian disc having a central inclined crack with frictional surfaces
Faculty
Engineering
Year:
2017
Type of Publication:
ZU Hosted
Pages:
856-866
Authors:
Amro Shehata Mohamed Shehata Fayed
Staff Zu Site
Abstract In Staff Site
Journal:
Fatigue & Fractue of Engineering Materials & Structures wiley
Volume:
41
Keywords :
Modes I/II , , , diametrically compressed Brazilian disc
Abstract:
An in-house finite element code was used to analyse a diametrically compressed isotropic homogeneous Brazilian disc having a central inclined crack with frictional surfaces for the evaluation of its corresponding modes I and II stress intensity factor (SIF). One-half of the disc was successfully idealized. The coefficient of friction between the crack surfaces ranged from 0 to 1 in steps of 0.1. Relative crack length ratios of 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, and 0.7 were analysed with crack angles up to 90° in steps of 5°. The crack angle corresponding to the transition from a mixed mode I/II to a pure mode II decreases with increasing the relative crack length ratio. An increase in the relative crack length ratio leads to an increase in the range of crack angles corresponding to a partially closed crack. The crack angle at which fully closed sliding crack surfaces commences is 30° independent of the relative crack length ratio and the friction coefficient. With the same relative crack length ratio and increasing the friction coefficient, there is a corresponding decrease in the crack angle for the maximum mode II SIF. With a decrease in the relative crack length ratio or the friction coefficient, the crack angle beyond which the crack surfaces become in a fully sticking mode decreases resulting in zero mode II SIF. Generally, mode II SIF decreases with increasing the friction coefficient between the crack surfaces. Good agreement has been generally obtained with relevant results found in the literature.
Author Related Publications
Amro Shehata Mohamed Shehata Fayed, "Morphological, mechanical, and thermal characterization of electrospun three‐dimensional graphite nanoplatelets/polystyrene ultra‐fine fibril composite fabrics", wileyonlinelibrary.com/journal/pc, 2021
More
Amro Shehata Mohamed Shehata Fayed, "Size effect of asymmetric four point bend specimen on crack propagation in ceramics", Ain Shams Journal of Mechanical Engineering, 2008
More
Amro Shehata Mohamed Shehata Fayed, "Modelling of cracking sites/development in axial dovetail joints of aero-engine compressor discs", International Journal of Fatigue, 2006
More
Amro Shehata Mohamed Shehata Fayed, "Notch elastic affected zone of oblique elliptical edge notches", Fourth Assiut University Int. Conf. on Mech. Eng. Advanced Tech. for Indus. Prod, 2006
More
Amro Shehata Mohamed Shehata Fayed, "Cyclic crack tip deformation of short cracks emanating from elliptical oblique notches", Fourth Assiut University Int. Conf. on Mech. Eng. Advanced Tech. for Indus. Prod.,, 2006
More
Department Related Publications
Ahmed Mohamed Hassan Ali Youssief, "Densification behavior and mechanical properties of niobium-oxide-doped alumina ceramics", Goller Verlag, 2013
More
Ahmed Mohamed Hassan Ali Youssief, "Toughening and strengthening of Nb2O5 doped zirconia/alumina (ZTA) composites", Elsevier, 2015
More
Selem Saleh Elsayed Ahmed Dawod, "Contribution of retardation mechanisms on the behaviour of fatigue crack growth in steel structures", 1st International Conference in Civil Engineering, Helwan University, Egypt, pp.172-182., 1998
More
Selem Saleh Elsayed Ahmed Dawod, "Effect of coarse aggregate type on the mechanical behavior of high strength concrete", 5th International Conference in Building materials and structural Engineering, Academy of Graduate Studies, Tripoli, Libya, pp.140-151. 2010., 2010
More
Selem Saleh Elsayed Ahmed Dawod, "FCG Behavior in Parallel Direction of Welded Austenitic Stainless Steel Plate", AEIC 12, 2012, 2012
More
جامعة المنصورة
جامعة الاسكندرية
جامعة القاهرة
جامعة سوهاج
جامعة الفيوم
جامعة بنها
جامعة دمياط
جامعة بورسعيد
جامعة حلوان
جامعة السويس
شراقوة
جامعة المنيا
جامعة دمنهور
جامعة المنوفية
جامعة أسوان
جامعة جنوب الوادى
جامعة قناة السويس
جامعة عين شمس
جامعة أسيوط
جامعة كفر الشيخ
جامعة السادات
جامعة طنطا
جامعة بنى سويف