Zagazig University Digital Repository
Home
Thesis & Publications
All Contents
Publications
Thesis
Graduation Projects
Research Area
Research Area Reports
Search by Research Area
Universities Thesis
ACADEMIC Links
ACADEMIC RESEARCH
Zagazig University Authors
Africa Research Statistics
Google Scholar
Research Gate
Researcher ID
CrossRef
Can ultrasonic parameters affect the impact and water barrier properties of nano-clay filled glass fiber/polyester composites?
Faculty
Engineering
Year:
2020
Type of Publication:
ZU Hosted
Pages:
Authors:
Mohamed Ali Elsayed Mohamed Agwa
Staff Zu Site
Abstract In Staff Site
Journal:
Journal of Industrial Textiles SAGE Publications
Volume:
Keywords :
, ultrasonic parameters affect , impact , water barrier
Abstract:
Good dispersion of the nanoparticles into the polymer is considered a critical issue, as it can provide higher strength and stiffness while poor dispersion is seen to decrease those properties. In the present work, the effect of three ultrasonic parameters (amplitude, time and cycle of sonication) on sonication technique for dispersing 1 wt.% nano-clay in polyester matrix was investigated. To disperse the nano-clay into the polyester matrix, sonication frequencies of 40% and 80%, sonication times of 0.5, 1 and 2 hours and pulse of 0.5 and 1 cycle were used. The effect of these ultrasonication parameters on water barrier and impact behavior of unfilled and filled glass fiber (GF)/polyester with nano-clay under dry, distilled and seawater conditions was studied. Results showed that, water absorption of nano-filled composites dispersed with all sonication parameters is lower than that of unfilled glass fiber/polyester composites immersed in distilled and seawater. Nano-clay filled GF/polyester composites showed an improvement in impact resistance under dry, distilled and seawater conditions with all sonication parameters. Among the used sonication parameters; time of 2 hours, amplitude of 40% and 0.5 cycle was found as the best parameter which resulted in the maximum enhancement in impact resistance, due to the addition of nano-clay to GF/polyester, of 8.2%, 14% and 19.6% under dry, distilled water and seawater conditions, respectively. Nonlinear minimization approach was exploited using MAPLE commercial software in order to find the suitable fit to the models of Fick and Langmuir. Diffusion coefficients for different sonication times were computed.
Author Related Publications
Mohamed Ali Elsayed Mohamed Agwa , "Treated basalt fibers reinforced nylon 6, 6/epoxy hybrid nanofibril composites", SAGE Publications, 2020
More
Mohamed Ali Elsayed Mohamed Agwa , "Effect of ultrasonic parameters on the mechanical properties of glass fiber reinforced polyester filled with nano-clay", SAGE Publications, 2020
More
Mohamed Ali Elsayed Mohamed Agwa , "Integrated vacuum assisted resin infusion and resin transfer molding technique for manufacturing of nano-filled glass fiber reinforced epoxy composite", SAGE Publications, 2020
More
Mohamed Ali Elsayed Mohamed Agwa , "Hardness, wear behavior and processing time of diluent and non-diluent nanocomposite laminates manufactured by vacuum infusion technique", SAGE Publications, 2020
More
Mohamed Ali Elsayed Mohamed Agwa , "Effect of ethanol on the mold filling-time and mechanical properties of woven glass fiber reinforced epoxy filled with TiO2 nanoparticles", SAGE Publications, 2020
More
Department Related Publications
Samia Fawzy Saad Salam, "تأثير لزوجه المواد الداخليه على تصرف الأجسام المتلامسه المرنه ذات السطوح الخشنه ومتعدده الطبقات ", لايوجد, 1900
More
Adel Fathy Meselhy Ibrahiem, "Fabrication and Properties of copper-alumina nanocomposite by mechano-chemical routes", لايوجد, 1900
More
Ashraf Abdelfattah Ali Hassanein, "Self Assembled Ultra Fine Carbon Coils by Wet Electro-Spinning", Materials Letters, 2006; 60: 2858-2862, 2006
More
Ashraf Abdelfattah Ali Hassanein, "New generation of super absorber nano fibroses hybrid fabric by electro-spinning", Journal of Materials Processing Technology, 2008; 199: 193-198, 2008
More
Ashraf Abdelfattah Ali Hassanein, "Wet Electrospun CuNP/Carbon Ultra Fine Coils for Super Air Core Inductors", ICCE-19 Conference, Shanghai, China, 24-30 July 2011. Also, World Journal of Engineering, Supplement 3, 2010: 37-40., 2010
More
جامعة المنصورة
جامعة الاسكندرية
جامعة القاهرة
جامعة سوهاج
جامعة الفيوم
جامعة بنها
جامعة دمياط
جامعة بورسعيد
جامعة حلوان
جامعة السويس
شراقوة
جامعة المنيا
جامعة دمنهور
جامعة المنوفية
جامعة أسوان
جامعة جنوب الوادى
جامعة قناة السويس
جامعة عين شمس
جامعة أسيوط
جامعة كفر الشيخ
جامعة السادات
جامعة طنطا
جامعة بنى سويف