The influence of mode II test configuration on the cohesive law of bonded joints

Faculty Engineering Year: 2019
Type of Publication: ZU Hosted Pages:
Authors:
Journal: Composite Structures Elsevier Volume:
Keywords : , influence , mode , test configuration , , cohesive , , bonded    
Abstract:
This paper aims to discuss the effect mode II type tests have on the cohesive law of bonded joints. For this reason, an objective inverse method has been developed to extract the cohesive law for experimental load-displacement data using an analytical procedure to represent the fracture process zone of mode II tests. The method is implemented on the more popular and standardized mode II tests: End-Notched Flexure and End-Load Split. The analysis of the experimental data shows that the cohesive law is independent of the test type. In addition, the obtained fracture toughness calculated by integrating the cohesive law shows good agreement with the J-integral method.
   
     
 
       

Author Related Publications

  • Saeed Ahmed Ibrahim AbdelMonsef, "BEHAVIOR IMPROVEMENT OF PULTRUDED FRP BEAM - COLUMN BOLTED CONNECTIONS", NSCC 13, Tampere, Finland, 2015, 2015 More
  • Saeed Ahmed Ibrahim AbdelMonsef, "Accurate simulation of delamination under mixed-mode loading using a multilinear cohesive law", elsevier, 2023 More
  • Saeed Ahmed Ibrahim AbdelMonsef, "Sensitivity analysis methodology to identify the critical material properties that affect the open hole strength of composites", Sage Journals, 2023 More
  • Saeed Ahmed Ibrahim AbdelMonsef, "An efficient method to extract a mode I cohesive law for bonded joints using the double cantilever beam test", Elsevier, 2019 More
  • Saeed Ahmed Ibrahim AbdelMonsef, "Effect of environmental conditioning on pure mode I fracture behaviour of adhesively bonded joints", Elsevier, 2020 More

Department Related Publications

  • Elsayed saad Abdelsalam Salman, "S. Abdel Salam, H.O. Soliman, E. ELshamy, M.Ismail. “ACTIVE CONTROL OF SEISMICALLY EXCITED STRUCTURES USING POLE ASSIGNMENT METHOD” Scientific Bulletin, Ain Shams Univ., Faculty Of Engineering, Cairo, Egypt, December 31,2005.", Scientific Bulletin, Ain Shams Univ., Faculty Of Engineering, Cairo, Egypt,, 2006 More
  • Elsayed saad Abdelsalam Salman, "S. Abdel Salam, G. Abdelah, and M. El-Kilany, “EXPERIMENTAL AND NUMERICAL STRESS ANALYSIS OF COMPINED STRIP FOOTING”, Proceedings of 11th. Annual Operations Research Conference (First International Confe.), November 28-30, 1988, Zagazig Uni", Proceedings of 11th. Annual Operations Research Conference (First International Confe.), Zagazig Univ., Egypt., 1988 More
  • Elsayed saad Abdelsalam Salman, "M. Mashhour, S. Abdel Salam, and S., ELnaggar, “EFFECT OF LOSS OF SUPPORT ON THE BEHAVIOUR OF COMPINED FOOTING ”, Proceedings of 3rd Arab Structural Eng. Conference, United Arab Emirates Univ., Fac. of Engg., March, 1989, Vol. 3.", Proceedings of 3rd Arab Structural Eng. Conference, United Arab Emirates Univ., Fac. of Eng., Vol. 3., 1989 More
  • Elsayed saad Abdelsalam Salman, "S. Abdel Salam, M. Mashhour, “REPAIR OF 3 BUILDING FOUNDATION IN CAIRO”, Proceedings of Conf. of Building Deterioration in the Arab world, Faculty of Engg., El- Malik Saud Univ., Riyad , K.S.A , March 1992.", Proceedings of Conf. of Building Deterioration in the Arab world, Faculty of Engg., El- Malik Saud Univ., Riyad , K.S.A, 1992 More
  • Elsayed saad Abdelsalam Salman, "S. Abdel Salam, M. Mashhour, and M. Hussein, “THE ANALYSIS OF INTERNAL STRESSES IN A CONTINUOUS FOOTINGUSIN PHOTOELASTICITY” , Bulletin of Fac. of Engg., Cairo Univ., No. 2, Vol. 36, June 1989.", Bulletin of Fac. of Engg., Cairo Univ., No. 2, Vol. 36, 1989 More
Tweet